Leica Biosystems ASP300 User Manual
Leica asp300, Automated vacuum tissue processor
Table of contents
Document Outline
- 1. Important notes
- 1.1 Symbols used in this manual
- 1.2 Designated use
- 2. Safety
- 2.1 Safety instructions
- 2.2 Warnings
- 2.3 Integrated safety devices
- 3. Instrument components and specifications
- 3.1 Specific instrument options
- 3.2 Overview - instrument components
- 3.3 Standard delivery - packing list
- 3.4 Technical data
- 3.5 Compatible reagents
- 4. Setting up the instrument
- 4.1 Site requirements
- 4.2 Electrical connection
- 4.3 Installing the accessories
- 4.4 Setting up the data connections
- 4.5 Alarm functions
- 4.6 Switching the instrument on
- 4.7 Touch screen functions
- 4.7.1 User interface - overview
- 4.7.2. Access control
- 4.8 Check list for first operation (at supervisor access level)
- 5. Operation
- 5.1 Reagent handling
- 5.1.1 Fill/drain reagents (other than wax)
- 5.1.2 Changing the wax
- 5.2 Setting up the instrument parameters
- 5.2.1 System setup
- 5.2.2 Editing the reagent list
- 5.2.3 Viewing the program list
- 5.2.4 Adding and/or modifying programs
- 5.2.5 Favorites (maximum of 5 programs)
- 5.2.6 Editing the stations
- 5.2.7 Reagent groups
- 5.3 Programs
- 5.3.1 Editing a selected program
- 5.3.2 Starting a program
- 5.4 Reagent status
- 5.5 System Monitor
- 5.6 On-line help
- 5.7 Configuring a printer (optional)
- 6. Trouble shooting
- 6.1 General
- 6.2 Power failure
- 6.3 Trouble shooting
- 6.4 Typical fill or drain problems
- 7. Cleaning and maintenance
- 7.1 Clean programs
- 7.1.1 Retort clean programs
- 7.1.2 Wax clean programs
- 7.1.3 Smart clean
- 7.2 General cleaning steps
- 7.3.1 Daily cleaning and maintenance
- 7.3.2 Periodic cleaning and maintenance
- 7.4 Preventative maintenance schedule
- 8. Warranty and service