5 switching the instrument on, Switching the instrument on, Initial operation – Leica Biosystems ASP6025 User Manual
Page 56
54
Instructions for Use V 2.2 RevI – 08/2013
4.5 Switching the instrument on
4.
Initial Operation
Screen saver
A screen saver will turn off the screen display if no key has been
pressed for 30 minutes.
• Press any part of the touchscreen to restore the screen.
After having been restored, the on-screen functions will be
nonoperational for a few seconds to avoid accidental activa-
tion of any keys.
• Plug the power cable (39,
Fig. 26
) into the "POWER IN" socket on the rear side of the instrument.
• Then, connect the cable to the power socket. If applicable, switch on the switch for the power socket.
• To switch on the instrument, press in the ON/OFF switch an on the rear panel of the instrument (item 37 in
Fig. 26
).
Fig. 59
Fig. 58
• The instrument will take a few minutes to initialize after
switching on.
See opposite for corresponding touchscreen display (
Fig. 58
).
• The Start screen will then appear. This is the PROGRAMS menu
while no programs have been defined in the FAVORITES menu
(
Fig. 59
).