Toshiba Magnia Z500 - Manual (Page 93)

Installing and Removing Hardware
CPU module
74
Installing the CPU module
NOTE: The CPU module may be fatally damaged by static
electricity because it consists of precise electronic parts. The
human body contains static electricity. Therefore, discharge
the static electricity before installing the CPU module. Static
electricity can be discharged by touching a nearby metallic
object with your fingers.
Install the CPU module in the procedure described below, while
referring to “Before starting operation” on page 46:
1 If the server is running, shut it down and turn off the power.
2 Unplug the power cable.
NOTE: Installing the CPU module while the power is on could
cause damage to the server or CPU module.
3 Remove the server panels.
See “Removing and replacing the server panels” on page 52.
CAUTION: Do not extend or replace the CPU module imme-
diately after the power is turned off. This may cause burns
because the CPU generates heat in its periphery.