Toshiba Magnia Z500 - Manual (Page 182)

System Configuration Setup
Configuring MegaRAID IDE
163
To access this screen, press the + keys during boot-
up.
Array Information
This section of the screen displays all the disk arrays configured.
Use this section to create, delete or edit the existing configurations.
The disk arrays are displayed as a node in a tree, like Windows
Explorer. When opened, each node displays the properties of the
array. Press the arrow keys <
↑ > and < ↓ > to navigate the proper-
ties and press to edit your selection.
! Array configuration type or RAID level (Stripe, Mirror)
! Drive numbers of the physical drives included in the array
! Stripe size (32 KB to 4 MB) which is valid for Stripe configu-
rations only
! Whether the system is bootable from one of the configured
arrays
! Initialize Array
! Build Array function, which is valid for Mirror array. This
option is used to build one drive from another.
Physical Drive Information
This section displays all the physical drives connected to the IDE
channels and their properties. The arrow keys<
↑ > and < ↓ > are