4 unplug all the cables from the server, Drawing out the base assembly, Removing the rack bracket – Toshiba Magnia Z500 User Manual

Page 84

Installing and Removing Hardware

Removing and replacing the server panels

3 Unplug the power cable of the server from the AC outlet or

UPS (uninterruptible power supply).

4 Unplug all the cables from the server.

5 Remove the front panel and loosen the four claw screws which

fix the Base Assembly and draw out the Base Assembly.

Drawing out the Base Assembly

6 When Removing two servers, or a server and a Blank Bracket,

remove two screws (M3) fixing the Rack Bracket and remove
it.

Removing the Rack Bracket

When removing a server and an External Unit, remove the
flat screw (M3) fixing the Base Assembly.

Claw screw

Screw (M3)

Flat screw (M3)

Rack Bracket

Blank Bracket

Front Bracket