Toshiba Magnia Z500 - Manual (Page 183)

System Configuration Setup
Configuring MegaRAID IDE
164
used to navigate the Physical Drive Information window. The
menus are as follows:
! Drive number
! Connection ID (Primary Master or Secondary Master)
! Array number of which the physical drive is a part
! Model number
! Firmware Rev# (firmware version of each drive)
! Size in MB of each drive
! The status of each drive (online, failed, or rebuilding)
NOTE: Information listed in the Physical Drive Information
window cannot be edited. Only the , <
↑ >, and < ↓ >
keys will work when the control is in the Physical Drive Infor-
mation window.
Physical Drive Options
In the top right corner of the Physical Drive Information are the
physical drive options. The available options are as follows:
! Enable/Disable write cache
! Boot sector virus protection
! DMA transfers
! Enable / Disable Buzzer
NOTE: These options apply to all drives attached to Mega-
RAID IDE.
Help section
The Help section of the Setup window screen displays hints on
available options. The Help section also provides a list of keys that