14 attach the fan duct 1 and fix it with one screw, Attaching the fan duct 1 – Toshiba Magnia Z500 User Manual

Page 110

Installing and Removing Hardware

CPU module

13 Install a new CPU module in the same procedure as for exten-

sion.

NOTE: Do not push the fin section of heat sink of the CPU
module. This may cause deformation of the heat sink.

Push the CPU module until both ends of it become horizontal
on the left and right sides, and confirm that it was inserted
completely.

14 Attach the fan duct 1 and fix it with one screw.

Attaching the fan duct 1