1 is the raid controller properly connected, 2 is the hard disk drive (hdd) properly connected, Cannot install the os – Toshiba Magnia Z500 User Manual
Page 214
Troubleshooting
Troubleshooting
197
If this does not remedy the problem, see “Remedy When Win-
dows 2000 is Unusable” on page 201.
1 Is the RAID controller properly connected?
See “Expansion cards” on page 112.
See the Software Guide of the RAID controller.
2 Is the Hard Disk Drive (HDD) properly connected?
See “Hard Disk Drive (HDD) –IDE HDD–” on page 106.
3 Execute the RAID controller utility to rebuild RAID.
All data may be lost if RAID is rebuilt. Do not rebuild RAID if
rebuilding is judged to be difficult.
See the Software Guide of the RAID controller.
Cannot install the OS
A probable cause is that the hard disk drive is not recognised.
Carry out the following procedure to check the cause of the
trouble.
If this does not remedy the problem, see “Remedy When Win-
dows 2000 is Unusable” on page 201.
1 Are the SCSI controller and RAID controller properly con-
nected?
See “Expansion cards” on page 112.
See the Software Guide of the RAID controller.
2 Is the Hard Disk Drive (HDD) properly connected?
See “Hard Disk Drive (HDD) –IDE HDD–” on page 106.
3 Increase the bootup priority of the Hard Disk Drive (HDD)
you want to install or the controller to which that Hard Disk
Drive (HDD) is currently connected.
4 When installing the OS, change the order in which the SCSI
controller. RAID controller and SCSI host adapter device
driver are installed.