Connecting the scsi cable of the scsi riser card, 15 attach the expansion card, 16 install the server panels – Toshiba Magnia Z500 User Manual

Page 131

Installing and Removing Hardware

Expansion cards

112

14 Connect the SCSI cable of the SCSI riser card. Pass the LAN

connector of SCSI riser card under the PCI bracket and insert it
into the slot, then fix the SCSI riser card and fan duct 2 with
one screw.

Connecting the SCSI cable of the SCSI riser card

NOTE: The SCSI riser card may be damaged by contacting
with a fan duct. Be careful to remove and insert the SCSI riser
card.

15 Attach the expansion card.

16 Install the server panels.

17 Connect the power cable of the server to the power supply and

switch on the server.