6 insert the entire base assembly into the rack, Inserting the entire base assembly, Fixing the housing on the left and right – Toshiba Magnia Z500 User Manual

Page 83: 8 connect the cables disconnected, Sliding the server (rack type) out of the rack

Installing and Removing Hardware

Removing and replacing the server panels

6 Insert the entire Base Assembly into the rack.

Inserting the entire Base Assembly

7 Fix the housing on the left and right with the claw screws of

Front Bracket (L) and Front Bracket (R), and attach the front
panel.

Fixing the housing on the left and right

8 Connect the cables disconnected.

Sliding the server (Rack Type) out of the rack

Slide the server out of the rack in the procedure described below,
while referring to “Before starting operation” on page 46.

1 If the server is running, shut it down and turn off the power.

2 Switch off all the peripheral units connected with the server.

Claw screw