Scsi utility, Starting the scsi utility – Toshiba Magnia Z500 User Manual
Page 173
System Configuration Setup
SCSI Utility
154
!
Load Setup Defaults
Resets all setup options to their default values, except for date,
time and passwords. Performs the same function as pressing
the F9 key.
!
Discard Changes
Resets all setup options to the previous saved values, except
for date, time and passwords.
!
Save Changes
Saves changes.
SCSI Utility
Description of SCSI raiser card (optional)
The SCSI riser card (optional) and any preinstalled SCSI devices
are set up prior to shipping. Use the SCSI Utility when you add or
replace a SCSI device in the device bay or need to confirm its con-
figuration settings.
Starting the SCSI Utility
When the server is turned on or restarted, the monitor displays the
onboard SCSI BIOS initialize message shown below. The display
differs based on the type of SCSI device installed in the server.
When the settings are correct, the SCSI ID and device name of the
SCSI device connected to the onboard SCSI controller appear on
the screen. To start the SCSI Utility, after the message “Press
press the
Adaptec SCSI BIOS vX.XX
(C)1998 Adaptec, Inc. All Rights Reserved.