Toshiba Magnia Z500 - Manual (Page 125)

Installing and Removing Hardware
Expansion cards
106
5 Install the PCI card on the expansion slot and fix it by one
screw.
Installing the PCI card
6 Install the server panels.
7 Connect the power cable of the server to the power supply and
switch on the server.
Installing the SCSI riser card
WARNING: Do not touch any parts except those necessary
for installing the device. There are many high-voltage parts
that may cause an electric shock.
When installing or removing the expansion card, shut the
server down, turn off the power, and pull out the power plug
from the wall outlet. This may cause an electric shock.
CAUTION: Put on gloves when installing or removing the
expansion card. Your hands may be injured by sharp projec-
tions on the optional boards or the server.
The riser card can be replaced with the SCSI riser card. The fol-
lowing describes how to replace with the SCSI riser card when the
option card is already installed for the riser card.