Toshiba Magnia Z500 - Manual (Page 210)

Troubleshooting
Troubleshooting
193
not remedy the problem, see “Remedy When Windows 2000 is
Unusable” on page 201.
1 Immediately turn the server off, and disconnect the plug from
the AC outlet.
2 Does the installation site satisfy the environmental consider-
ations (e.g. ambient temperature and humidity)?
See “Environmental considerations” on page 5.
3 Are there any foreign objects blocking ventilation holes?
Nothing happens if you press the power switch. Or, nothing
appears on screen even though you can hear the server run-
ning
Probable causes are that the peripheral devices or cables are not
correctly connected, or fatal trouble has occurred on the server.
Carry out the following procedure to check the cause of the trou-
ble. If this does not remedy the problem, see “Remedy When
Windows 2000 is Unusable” on page 201.
1 Are the keyboard, mouse, and display unit properly connected
to the server?
If the switch box is used on a Rack Type, also check the con-
nections with other devices and that the server is properly
selected.
See “How to connect peripheral devices” on page 27.
2 Is the PCI expansion card properly inserted into the appropri-
ate slot on the motherboard, and is it held firmly in place by the
PCI bracket?
See “Installing/removing an optional device” on page 58.
See “Expansion cards” on page 112.
3 Are the peripheral devices connected to the server properly?
See “Connecting peripheral devices” on page 27.