Toshiba Magnia Z500 - Manual (Page 47)

Getting Started
Connecting the power cable
28
Connecting the power cable
NOTE: Use of an uninterruptible power supply (UPS) is rec-
ommended to avoid losing data because of unexpected shut-
down or power failure.
After connection of peripheral devices is complete, connect the
power cable to this server following the procedure mentioned
below.
1 Connect the power cable to the connector on the back of the
server.
Connecting the power cable
2 Plug the power cable into an AC outlet or the power output
connector of an uninterruptible power supply (UPS).