Toshiba Magnia Z500 - Manual (Page 124)

Installing and Removing Hardware
Expansion cards
105
Install the expansion card in the procedure described below, while
referring to “Before starting operation” on page 46:
1 If the server is running, shut it down and turn off the power.
2 Unplug the power cable.
NOTE: Installing the expansion card while the power is on
may damage the server and expansion card.
3 Remove the server panels.
See “Removing and replacing the server panels” on page 52.
4 Remove one screw and the PCI slot cover from the PCI
bracket.
Removing the PCI slot cover