Toshiba Magnia Z500 - Manual (Page 202)

Installing Software
AFT, ALB and IPSec functions
184
Creating the PROSet II icon
The PROSetII icon is used for setting AFT/ALB.
1 The Toshiba Server Setup Tool CD-ROM (supplied) in the
CD-ROM drive.
2 Browse the CD-ROM drive on Explorer, and double-click
setup.exe in the following directory:
:
\Public\Utils\Intel\Proset\setup.exe
3 According to the installer, install “PROSet II”.
Note: For Custom Setup, do no check “Configuration Tools”
and “Management Agents”.
4 Reboot the server.
5 After the server has rebooted, make sure that the “PROSetII”
icon appears on the control panel.
Setup of AFT (Adapter Fault Tolerance)/ALB (Adap-
tive Load Balancing)
1 Double-click “Intel(R)PROSetII” from “Start” → “Settings”
→ “Control Panel”.
2 Select a LAN adapter to which AFT/ALB is to be configured
in the list of adapters in “Intel(R)PROSetII”, and select “Right
click”
→ “Add to Team” → “Create New Team”.
3 The “Teaming Wizard” screen is displayed. Select either
“Adapter Fault Tolerance” or “Adaptive Load Balancing”, and
select “Next”.
4 Mark the LAN adapter to add to the configuration, and select
“Next”.
5 Select “Done” at “Teaming Wizard”.
6 The icon “Member Adapters” appears in the PROSetII screen.
Among the adapters to which AFT/ALB is installed, select the