Toshiba Magnia Z500 - Manual (Page 104)

Installing and Removing Hardware
CPU module
85
Replacing the CPU module
NOTE: The CPU module may be fatally damaged by static
electricity because it consists of precise electronic parts. The
human body contains static electricity. Therefore, discharge
the static electricity before installing the CPU module. Static
electricity can be discharged by only touching a nearby
metallic object with your fingers.
Replace the CPU module in the procedure described below, while
referring to “Before starting operation” on page 46:
1 If the server is running, shut it down and turn off the power.
2 Unplug the power cable.
NOTE: Replacing the CPU module while the power is on may
damage the server and CPU module.
3 Remove the server panels.
See “Removing and replacing the server panels” on page 52.
CAUTION: Do not extend or replace the CPU module imme-
diately after the power is turned off. This may cause burns
because CPU generates heat in its periphery.