Switching on the server, Turning on the server in the usual process, 3 turn on the display – Toshiba Magnia Z500 User Manual
Page 49: 4 open the front panel, 5 press the power/sleep button
Getting Started
Switching on the server
30
Switching on the server
NOTE: When turning on the server again, turn on the power
button at least 10 seconds after the power button was last
turned off. If the server is switched on again within 10 sec-
onds after it was switched off last, it may cause malfunction of
the server or trouble with it.
When using the server with peripheral devices, connect them
before switching on the server.
Turning on the server in the usual process
Tturn on the server according to the following procedure:
1 Check to see if all of the peripheral devices such as a display,
keyboard, mouse, etc. are correctly connected with the server.
2 Check to see if the power cables of the System Unit and
Exteral Units are connected with AC outlets with the ground
line or an uninterruptible power supply (UPS).
Make sure that the power indicator (
) lights up in amber.
3 Turn on the display.
4 Open the front panel.
5 Press the power/sleep button.
Make sure that the power indicator (
) lights up in green.