Replacing the internal battery, 1 write down the system configuration information, 2 shut down and turn off your server – Toshiba Magnia Z500 User Manual

Page 115: 3 unplug the power cable, 4 remove the server panels, Removing the battery

Installing and Removing Hardware

Internal battery

Replacing the internal battery

Replace the battery in the procedure described below, while refer-
ring to “Before starting operation” on page 46:

1 Write down the system configuration information.

2 Shut down and turn off your server.

3 Unplug the power cable.

NOTE: Don't replace the battery when your server is on, oth-
erwise your server or the internal battery could be damaged.

4 Remove the server panels.

5 Push lightly the battery from the side and put your fingers

below the battery, and pull it up.

Removing the battery