Toshiba Magnia Z500 - Manual (Page 175)

System Configuration Setup
SCSI Utility
156
SCSI Utility Keyboard Commands]
Changing SCSI Device Settings
1 Using the arrow keys (< ↑ >< ↓ >), select the desired item then
press the key. The submenu or selection menu corre-
sponding to the selected item appears.
2 Make any necessary changes then save the changes.
3 Select Exit this Menu to exit the submenu.
Setting Devices
Select Configure/View Host Adapter Setting in the main
menu in the device setting screen mode to display the
Adaptec Utility.
Returns control to the previous screen mode.
Specifies a data item.
<
↑ > Returns control to the previous data item.
< ↓ > Advances control to the next data item.
Adaptec < SCSISelect (TM) > Utility vX.XX.XX
AIC-7892 A at slot 06, 06:01:00
Configuration
BIOS Information
Interrupt (IRQ) Channel ................. 11
I/O Port Address ........................ 2000h
SCSI Bus Interface Definitions
SCSI Controller ID .......................... 7
SCSI Controller Parity .....................Enabled
Additional Options
Boot Device Configuration ................... Press
SCSI Device Configuration ................... Press
Advanced Configuration ...................... Press
- Reset to SCSI Controller Defaults
Arrow keys to move cursor, to select option, to exit (*=default )