Toshiba Magnia Z500 - Manual (Page 71)

Installing and Removing Hardware
Removing and replacing the server panels
52
Removing and replacing the server panels
To mount optional devices inside the server, you need to remove
the server panels depending on the option you are mounting.
CAUTION: When sliding a server panel, be careful not to
catch your finger between it and the server. The panel might
cause injury. When removing or installing the server panel,
turn off the power and unplug the power cable connector in
advance. Otherwise, you might get an electric shock.
Removing the server panels (for Micro Tower Types)
Follow these steps to remove the server panels:
1 Shut down the server and turn off the power if it is in opera-
tion.
2 Unplug the power cable.
3 Remove one screw and slide the outer cover (upper) to the rear
of the server.
Removing the outer cover (upper)