Installing the network driver, 2 select “driver” tab, click “update driver, 3 click “next” in the “update device driver wizard – Toshiba Magnia Z500 User Manual
Page 197: 7 click “next, 8 click “finish” in the “finish screen, 9 update other ethernet controller in same method, 10 restart computer, Setting saf-te controller
Installing Software
Windows® 2000 Server
179
Installing the network driver
1 Double-click one of two “Ethernet Controller” under “Other
devices”.
2 Select “Driver” tab, click “Update Driver”.
3 Click “Next” in the “Update Device Driver Wizard”.
4 Select “Search for a suitable driver for my device” , click
“Next”.
5 Set Server Setup Tool CD into CD-ROM drive, check at
“Specify a location”, click “Next”.
6 Type following driver pass to “Copy manufacture's files
from:”, then click “Next”.
7 Click “Next”.
8 Click “Finish” in the “Finish screen”.
9 Update other Ethernet Controller in same method.
10 Restart computer.
Setting SAF-TE controller
Only when a magnetic disk device is connected to the SCSI Host
adapter, set the SAF-TE controller in the following steps.
1 Start Windows 2000 and log in by the administrator’s ID (or an
user’s ID with an equivalent authority).
2 Select “Start”, “Settings”, “Control Panel”, “System”, “Hard-
ware” and “Device Manager...”.
3 Right-click on “SDR GEM318 SCSI Processor Device” in
“Other devices” and select “Uninstall...”.
4 When a confirmation message for deletion of device appears,
select “OK”.
5 Select “Action” and “Scan for of hardware changes”.