Toshiba Magnia Z500 - Manual (Page 44)

Getting Started
Connecting peripheral devices
25
(3) Cooling fans
The server contains two cooling fans.
(4) CPU sockets
Used to mount CPU modules.
See “CPU module” on page 81.
(5) Memory slots
Used to mount up to 4 memory modules to expand the server’s
RAM (Random Access Memory).
See “Memory module” on page 75.
(6) Expansion slot
Used to mount expansion cards. A 64 bit/133 MHz PCI-X card of
card length 194 mm or less can be added on to the rise card. The
slot is compliant with PCI 2.2 standard.
See “Expansion cards” on page 112.
(7) IDE HDD cage
Used to mount 3.5” hard disk (IDE).
(8) Board for wireless card
The board for wireless card can contain 2 wireless LAN cards.
Connecting peripheral devices
How to connect peripheral devices
There are USB connectors for connecting USB devices such as
FDD and so on, on the front of the server. And there are I/O con-
nectors for connecting peripheral devices such as a keyboard,
mouse, display and so on, on the back of the server. Properly con-
nect the devices to the connectors before turning on the server.