Toshiba Magnia Z500 - Manual (Page 193)

Installing Software
Windows® 2000 Server
175
4 When the following message appears, select “Adaptec
Ultra160 Family PCI SCSI Controller (Windows 2000)”, and
then press the key.
Selecting a driver for the RAID controller G (MR520)
To select the driver, follow these steps.
1 Press the key after the Windows 2000 Server Setup win-
dow has turned entirely to blue.
2 When a message appears on the screen, asking whether you
want to add a device driver for mass storage device, press the
key.
3 Insert the MegaRAID driver and Utility for Series 520 Win-
dows 2000 Driver floppy disk, which comes with your RAID
controller, into the floppy disk drive, and then press the
key.
4 When the following message appears, select “MegaRAID
SCSI 320-1 Controller Driver”, and then press the
key.
After this, continue to install Windows 2000, following the
instructions that appears on the screen.
NOTE: If the RAID Controller is connected to the server, be
sure to install the “Power Console” of the RAID Controller
Utility after installing the Windows 2000 Server.
See “MegaRAID Software Guide” for details of the Power
Console.
Adaptec Ultra160 Family PCI SCSI Controller (Win-
dows 2000)
LSI Logic MegaRAID Express500 RAID Controller Driver
LSI Logic MegaRAID Elite1600 RAID Controller Driver
LSI Logic MegaRAID Enterprise1600 RAID Controller Driver