Toshiba Magnia Z500 - Manual (Page 88)

Installing and Removing Hardware
Memory module
69
Memory slots (Top view)
WARNING: When installing a peripheral unit, don't open any
part other than those specified by the instructions. Touching
unspecified parts may cause an electric shock.
CAUTION: Don't install or remove additional memory mod-
ules just after the server is switched off to avoid burning the
hand with the extension memory sockets and their peripher-
ies that are heated during operation.
Installing an additional memory module
NOTE: Since the extension memory module is a precise
electronic device, it may be seriously damaged by static elec-
tricity. Before installing an additional memory module, be sure
to discharge static electricity from your body by touching a
metallic thing at hand, because the human body is always
charged with a small amount of electricity.
Before installing an additional memory module, carefully read
“Before starting operation” on page 46 and proceed to the job fol-
lowing procedure mentioned below:
Memory slot 1A
Memory slot 1B
Memory slot 2A
Memory slot 2B