AT&T System 25 - Manual (Page 61)

INSTALLATION
Cold and warm starts both display the same type of information on the SAT. This
consists of a listing of the version of the firmware loaded in the CPU/Memory
CP, followed by a configuration listing of all CPs recognized by the system. The
CPU/Memory CP is not in the configuration listing; however, it is located in slot 1
of Cabinet 1.
Table 2-C provides a listing of SAT messages
cool or warm start. The displayed message is
and port translations. that may be displayed during a
a result of CP occupancy, type,
Table 2-C. Displayed SAT Messages During Cold or Warm Restart
Circuit Pack (CP) Port Translated Displayed
in Slot Message
No Yes
Missing †
Yes No
CP Type Listed #
Yes Yes CP Type Listed
Yes Yes (doesn’t match CP Type Listed*
physical CP)
Yes (Unsupported Yes or No Illegal
CP Type)
† Warm restart only.
# Mark indicating that the CP is unused.
* Mark indicating that the CP is mismatched.
November 1995 2-37