AT&T System 25 User Manual
Page 200
MAINTENANCE
6.
7.
8.
9.
Enter 9 (for the SAVE/RESTORE selection) and press
The system responds with:
A c t i o n =
Enter 10 for a warm restart.
The system responds with:
Save/Restore: Action=10 Data=.
Enter D.
The system responds with:
D a t a =
10.
Enter 1.
The system responds with:
Save/Restore: Action=10 Data=1
YOU ARE ABOUT TO FORCE A WARM START
c to continue, any other key for abort.
11.
Enter c to initiate the warm restart.
To perform a cold restart, follow the preceding steps for Restarting the
System, except enter 20 after Action=. Enter 1 or 2 after Data=. (Data=1 ,
initiates a “full default” cold start; Data=2 initiates a limited cold start. See
the Administration Manual, 555-540-500, for a listing of default translations
provided by the system.
The system responds with:
Save/Restore: Action=20 Data=1 (or Data=2)
YOU ARE ABOUT TO INITIATE A COLD START
c to continue, any other key to abort.
Enter c to initiate the cold restart.
If you make any typing errors while entering information, press the
backspace key. Each time you press
e r a s e d .
4-24