AT&T System 25 - Manual (Page 403)

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION POSSIBLE SOLUTION
7 0 5 4 : out of space System speed digit pool is full.
no more room in digit
p o o l
7 2 0 0 : entry out of range Invalid TARGET value specification.
RS232 value out of range Target value should be 1-4. See:
MENU = 10 (RS232)
7 2 0 2 : inappropriate request ACTION = 0 under MENU = 10
improper procedure (RS232) is invalid.
7 2 0 3 : incorrect entry MENU = 10 (RS232) ACTION = 1
logical channel out of DATA = must be 1-4 (anything else
r a n g e is invalid.)
7204: incorrect entry MENU = 10 (RS232) ACTION = 2
return delay out of range DATA = must be 0-2
7206: incorrect entry MENU = 10 (RS232) ACTION = 3
incorrect baud rate DATA = baud rates must be 300,
1200, 4800, 9600.
Legal baud rates for Administration
and Maintenance are 1200, 4800,
9600. Legal baud rate for SMDR is
1200. Legal baud rate for Tape is
1 2 0 0 .
7 3 0 0 : incorrect action number Under Save/Restore, MENU = 9
data must be 1,2,3,10 or Action values must be 1,2,3,10, or
2 0 2 0 .
7 3 0 2 : inappropriate request Cannot administer system during
can’t update translation - tape backup.
tape lockout
7 4 0 0 : incorrect entry MENU = 10 (RS-232) TARGET = 3
data must be 1 or 4 only ACTION = 1 DATA = 2 or 3
SMDR output can come out of the
NOTE: Above is tape port.
statement is wrong.
data must be 2 or 3 only
F-25