AT&T System 25 - Manual (Page 383)

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION POSSIBLE SOLUTION
1044: inappropriate request Neither primary nor secondary CAP
primary or secondary CAP universal port number agrees with the
unavailable one stored by admin. on the stack.
1 0 4 5 : at installed max At system maximum of 104 data
-104 data port p o r t s .
1046: incorrect button Duplicate button function code found.
function code
button facility already
e x i s t s
1047: incorrect button number Button number out of range for voice
out of range or reserved terminal type or certain button types
for system use are not assignable.
1048: inappropriate request Certain feature buttons are not
CAP buttons fixed - can’t administrable on the CAP.
a s s i g n
1 0 4 9 : inappropriate request A DID trunk cannot be part of an
DID trunk can’t be pool outgoing trunk pool facility
m e m b e r
1050: incorrect facility type Must be an ATL or MET set before
must be ATL set or MET you can administer a button feature
s e t or facility type. Facility type cannot
be used in conjunction with this
button function code.
1051: inappropriate request At system maximum for sets allowed
group station max reached in a particular group.
1052: at installed max Can only install 1 Service Circuit per
-Service Circuit system.
1 0 5 4 : incorrect button External button code entered by
function code customer is invalid.
does not exist or used
i m p r o p e r l y
1055: entry out of range Allow a 0-1 only, any other input is
must be 0-1 with invalid.
station/ring enable
F-5