AT&T System 25 - Manual (Page 400)

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION POSSIBLE SOLUTION
7 0 2 3 : incorrect entry Data value cannot exceed 1.
data can’t exceed 1
7 0 2 6 : incorrect PDC Must be station or data port.
must be station or data
port
7 0 2 7 : incorrect entry Entry cannot be 0 or exceed 5
can’t be 0 or exceed 5 digits.
digits
7030: incorrect entry Leading 0 was found while
leading zeros not allowed processing item 2 for paging zone
a d d .
7 0 3 1 : out of space Not enough room for adding new
no more room to add paging zones.
7 0 3 2 : incorrect PDC Entered numbers for this zone and
this zone & all zone all zone is ambiguous.
PDC’s do not agree
7 0 3 4 : action number out of Must assign a paging zone before
s e q u e n c e trying to administer all zone paging.
must enter 2 first
7 0 3 5 : inappropriate request The paging zone is equipped;
paging zone not therefore the restriction flag is
e q u i p p e d unknown.
7036: incorrect button number Button on station is previously
station button already assigned.
e x i s t s