AT&T System 25 - Manual (Page 399)

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION POSSIBLE SOLUTION
7005: incorrect entry Entered data not valid for restricting
incorrect data to restrict PBX calls.
P B X c a l l s
7 0 0 6 : incorrect entry Number of seconds before a
data can’t exceed 120 camped on call returns to the
attendant console [1-1 20].
7 0 0 7 : inappropriate request To install CAP: Go to MENU 1 (Port)
must install CAP first ACTION = 1, DATA = terminal type
(309, or 310)
ACTION = 2, DATA = PDC
7 0 0 8 : inappropriate request Cannot set bit for FPDCs to go to
must install CAP first the CAP because neither the
primary nor secondary CAP is
installed.
7 0 1 0 : out of space Number plan is full.
no more room to change
7 0 1 1 : out of space ID (Name) directory is full.
no more room to add
7 0 1 2 : inappropriate request Check to see if PDC already exists.
PDC already exists Go to MENU 8-Search
ACTION = 1 DATA = 11
Hit c to continue to search for
assigned PDCs
7 0 1 6 : incorrect entry Data must be O-1. See:
data can’t exceed 1 MENU = 4 (System)
ACTION = 5
for more information.
7 0 1 7 : incorrect entry Data not valid for number of DID
must be 0 - 4 digits used by PDCs.
7 0 1 9 : PDC out of range System 25 dial codes may have
must be 1-9999 1,2,3 or 4 digits (1-9999).
7 0 2 0 : entry out of range Data is greater than 2 digits.
data can’t exceed 2 digits
7 0 2 1 : incorrect entry System Maximum Account Code
account code can’t digits (O-1 5). Default = 15
exceed 15 digits
F-21