AT&T System 25 - Manual (Page 359)

APPENDIX E: Administration Codes and Data
Table E-V. System Administration (Menu=4) (Contd)
ACTION DESCRIPTlON DATA
103 For Callback Queuing: Enter the [0-1 20; 30]
minimum time (in seconds) between
callback retries for outgoing facilities
110 For Remote Access: Enable barrier [1=Y/1=N]
codes?
111 Assign DID remote access digits [PD.; 0]
113 Assign the remote Facility Restriction [0-3;3]
Level (FRL)
114 Assign the remote toll restriction class [1-4; 0 for none]
115 Assign remote total outward restriction [1=Y/0=N]
116 Assign remote CO pool dial restriction [ 1 = Y / 0 = N ]
117 Assign remote other pools dial restriction [ 1 = Y / 0 = N ]
119 Assign the number of barrier code digits [5 through 15; 5]
to be used: 5 through 15 digits*
120 Assign a barrier code number for remote [ 1 - 1 6 ]
a c c e s s
121 Assign barrier code digits (5 through 15 [5 through 15 digits or 0
digits; O-9, *, #)
to remove]
122 Assign barrier code’s FRL [0-3; 3]
123 Assign barrier code’s toll class [1-4 or O for none]
124 Assign barrier code’s total outward [1=Y/0=N]
restriction
125 Assign barrier code’s CO pool dial [1=Y/0=N]
restriction
126 Assign barrier code’s “other pools” dial [1=Y/0=N]
r e s t r i c t i o n
128 To identify SMDR terminal {0=non-CAT;1=CAT]
129 Assign remote access Night Service [PD.; 0]
backup station
*NOTE: Whenever the barrier code size is changed, the previously entered
barrier codes are cleared.
E-40 November 1995