AT&T System 25 User Manual
Page 193
MAINTENANCE
5.
6.
7.
.
8.
9.
10.
Enter 2.
The system responds with:
Save/Restore: Action=2 Data=.
Enter D.
The system completes the word Data followed by the = sign.
Enter 1.
The system responds with the complete line:
Save/Restore: Action=2 Data=1
W25: YOU ARE ABOUT TO START A TAPE VERIFY
c for continue, any other key for abort
Press c to continue, and the tape unit is automatically started by the
system. Verifying translations takes about 5 minutes.
When verification is complete, the unit stops automatically.
If verification is successful, the SAT displays:
“(feature code issue, date, time, size)”
followed by:
VERIFY COMPLETED SUCCESSFULLY.
Press the REWIND button to rewind the tape fully.
Label the tape with the date, time, task and feature release, and
customer’s name.
Be sure the tape is stored in a safe place for
future access.
Note: Task and Feature release can be acquired by
pressing m on the SAT.
Repeat both the Save and Verify procedures for a backup tape.
Label and date both tapes accurately, and be sure they are stored in
a secure place for future access.
4-17