AT&T System 25 - Manual (Page 391)

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION POSSIBLE SOLUTION
2 0 5 3 : incorrect entry Area Code = NPA
incorrect area code office where N=2-9, P=0-l ,and A=l -9.
c o d e Office Code = NXX where N=2-9,
X = 0 - 9
Invalid area code or office code for
Toll Calls Allowed.
2 0 5 4 : incorrect entry Data entry must be 0-2.
data must be 0-2
2 0 5 5 : inappropriate request Found office code but not in proper
office code found in wrong l i s t .
l i s t
2056: incorrect entry Area Code does not exist in the NPA
area code does not exist (no such area code found in table).
2 0 5 7 : incorrect entry Specified office code pattern and list
incorrect area code office not found in table) There are no office
c o d e codes for the given list under the area
c o d e .
2060: action number out of Check the Administration Manual for
sequence correct ACTION sequence.
improper procedure
2062: entry out of range Call Coverage Group out of range -
number out of range too high.
2063: incorrect entry Call Coverage Group zero not
number can’t be 0 allowed.
2 0 6 6 : incorrect facility type Port not a station
must be station type
2 0 6 7 Invalid data, SLC Number entered not in allowable
reprioritization 0-30 sec. range of time.
2068: incorrect PDC Zero not allowed for station PDC.
station can’t have 0
2 0 7 1 : out of space No more Universal Port Numbers
no more groups available (UPNs) available.
2 0 7 2 : action number out of Check Admin. manual for correct
r a n g e ACTION number/sequence.
does not exist or used
improperly
2 0 7 3 : incorrect entry LIST ‘target’ is out of range.
list reference out of range
F-13