AT&T System 25 - Manual (Page 413)

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION POSSIBLE SOLUTION
9 0 4 7 Incorrect entry. Must be CSS or 0.
9048 Cannot change board type Untranslated or (and) remove board
via the HI D CKT menu.
f i r s t .
9 0 4 9 Invalid TN or ZTN code forUse correct code to set board options
the HI D CKT menu. for board type.
9050 At installed maximum System has the maximum number of
board/port type.
9 0 5 1 Incorrect entry, board must Board enabled, cannot administer
be disabled. signaling mode.
9052 Cannot change signaling Channel 24 is administered as the
mode channel 24 signaling channel.
translated
9 0 5 3 Entry not allowed CSS not administered as a T1 board.
9 0 5 4 Incorrect entry Must be 1 to 5.
9 0 5 5 Incorrect entry. Must be CSS.
9 0 5 6 Entry not allowed Slot not administered as a T1 board
or empty.
9 0 6 0 Port removal blocked. Final port on T1 board administered
as a synch reference.
9 0 6 1 Translation for port 24 Board administered for 24th channel
b l o c k e d . signaling.
12000 Incorrect action number. Must be O -3 or next action-button.
12003 Action number out of Must enter action 1 first.
sequence.
12006 Entry out of range Data must be 1-255.
12007 Entry out of range Action 3 data cannot exceed 255.
12008 Action number out of Enter action 1 and/or 2 first.
sequence.
12009 Entry out of range Data must be 0 or 1.
12010 Entry out of range Data cannnot exceed 104.
F-35