AT&T System 25 - Manual (Page 350)

APPENDIX E: Administration Codes and Data
Table E-P. Port Administration, Auxiliary Equipment (Menu-1 ) (Contd)
ACTION DESCRIPTlON DATA
1 Assign voice Messaging Service port [260 - 263]
type:
260 = standard voice mail services
261 = call coverage/auto-attendant
262 = message drop
263 = bulletin board
2 Assign PD for this VMS port [PD.]
3 Restrict dial access to the CO trunk pool [1=Y/0=N]
4 Restrict dial access to all other trunk [1=Y/0=N]
pools
5 Make this VMS port dial-accessible [1=Y/0=N]
10 Make this VMS port an extended station† [1=Y/0=N]
13 Restrict this station from making any [1=Y/0=N]
outside calls
14 Assign a toll restriction class [0-4]
15 Assign an ARS Facility Restriction Level [0-3]
90 Assign/Remove VMS port Display ID ["11 characters or less,”
or** to remove]
1 Assign pooled modem [1901]
1 Assign additional tone detector [2101]
1 Assign dial dictation [2201 (if auxiliary trunk
interface); 201 (if
station port interface)]
2 Assign dial dictation PD. [PD.]
1 Assign selector console [1 601 or 1602]
21-27 Assign the hundreds group to this button
† For TN742/TN746 ports only. Use the default value for extended stations in order to meet
FCC compliance for level of dial tone.
November 1995 E-31