AT&T System 25 User Manual
Page 195
MAINTENANCE
8.
9.
10.
11.
Press c for continue, and the tape unit is automatically started by the
system. Restoring translations takes about 5 minutes.
When restoration is complete, the unit stops automatically.
If restoration is successful, the SAT displays:
(feature code issue, date, time, size)
followed by:
RESTORE COMPLETED SUCCESSFULLY
Initiated warm start
If above message is not displayed on the SAT, restoration was
probably not successful.
Force a warm start of the system and
check the restart message (see “Restarting the System”). If the
system has done a cold restart (which you can tell by reading the
restart message), the restoration was not successful.
If the restoration was not successful, repeat the restoration process
or escalate the problem to a higher support level.
Press the REWIND button to rewind the tape fully.
Be sure that the tape and the backup tape are labeled and dated
accurately and stored in a secure place for future access.
4-19