AT&T System 25 - Manual (Page 396)

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION POSSIBLE SOLUTION
4 0 0 1 : entry out of range Maximum FPDCs = 300
FPDC max reached
4 0 0 2 : incorrect entry Specified FPDC not found.
does not exist or used
improperly
4 0 0 3 : action number out of Must do action 1 before removing
sequence F P D C .
do action 1 display before
FPDC removal
4005: inappropriate request CAP not installed even through flag
unlogged FPDC’s/non- is set to send FPDCs not logged in
existent CAP t h e r e .
4 0 0 7 : incorrect action number Action invalid for FPDC update or
can’t exceed 2 if FPDC display.
update/display
4 0 0 8 : inappropriate request Facility unequipped for FPDC
facility not equipped d i s p l a y .
4014: at installed max -300 Maximum FPDCs = 300
FPDCs
5003: incorrect entry Number of seconds after last digit
data out of range dialed to commence billing is
invalid.
5 0 0 5 : entry out of range NPA cannot exceed 3 digits.
area code can’t exceed 3
d i g i t s
5 0 0 6 : incorrect entry Area Code= NPA where N=2-9,
area code digit out of P=0-l, and A=1-9.
r a n g e
5007: incorrect entry Date must be in the form
date must be 6 digits ( M M D D Y Y ) .
5 0 1 0 : incorrect entry Date = MMDDYY where MM=01 -
incorrect month data 12, DD=01 -31, and YY=00-99.
5011: incorrect entry Day = HHMM where HH=00-23,
incorrect day data MM=00-59
5 0 1 2 : entry out of range Hours/minutes = HHMM (4 digits
hours/minutes must be 4 exactly)
digits
F-18