AT&T System 25 - Manual (Page 373)

APPENDIX E:
Table
For Action=1,
Administration Codes and Data
E-K Save/Restore and System Restarts (Menu=9)
you need to press the PLAY and RECORD buttons.
For Action=2 and Action=3, you need to press the PLAY button.
ACTION DESCRIPTION DATA
1 Save (Backup) translations [1 to run]
2 Verify translations [1 to run]
3 Restore translations [1 to run]
10 Force a system warm start. F O R [1 to run]
QUALIFIED SYSTEMS TECHNICIAN
ONLY
20 Force a system cold start. FOR [1 for Full
QUALIFIED SYSTEMS TECHNICIAN Default, 2 for
ONLY. "Full Default" cold start will Limited Default]
reinstate all default values (true cold
start). "Limited Default" cold start will
reinstate default values everywhere
except for port boards.
Caution: Action=3 will interrupt phone service for about ten
minutes.
You should save and restore translations during system off-hours, since
these operations can affect phone service and call traffic can affect these
operations.
E-54