AT&T System 25 - Manual (Page 343)

APPENDIX E: Administration Codes and Data
Table E-K. PORT/PDC Administration, Data Terminals (Menu=1/2)
(Contd)
ACTION DESCRIPTION DATA
67 Allow terminal to operate at a baud rate [1=Y/0=N]
of 9600 bps†
68 Allow terminal to operate at a baud rate [1=Y/0=N]
of 19200 bps†
69 Assign this parity setting to correspond [0-3; 2]
with terminal’s parity setting†
0= Bit in parity
position (no parity);
1 =Bit in parity
position (no parity)
2=Even parity;
3= Odd parity
70 Allow keyboard dialing/Command Mode† [1=Y/0=N]
71 Allow user configuration of data port [1=Y/0=N]
parameters.† (The default is 0 for
STARLAN CP.)
72 Allow mismatch of user’s data module [1=Y/0=N]
and data port baud rate†
73 Allow characters dialed from keyboard [1=Y/0=N]
to be echoed by the data port†
74 Enter your disconnect code† [1=2 short BREAKS/
0=1 long BREAK]
75 Allow call progress text messages to be [1=Y/0=N]
displayed on screen.†
77 Display connection indication message† [1=Y/0=N]
90 Assign/remove DDC Display ID ["11 characters
or less", or ""
to remove]
† Read-only for STARLAN CP.
E-24