AT&T System 25 - Manual (Page 380)

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION POSSIBLE SOLUTION
1 0 0 6 : incorrect entry Cabinet-Slot-Port (CSSPP) PP must
port-on-board number out be a number from 1 to 8 (varies on
of range
different circuit packs)
1 0 0 7 : incorrect action number Must administer ACTION = 1 before
can ‘t exceed 1 with proceeding.
unequipped facility
1008: incorrect entry The entered port is greater than
port-on-board number out maximum port number on the
of range
associated board.
1 0 0 9 : incorrect entry Number must be 5 digits. Nonspecial
number must be 5 digits port does not have 5 digits.
1 0 1 0 : incorrect facility type The facility type is not valid for this
does not exist or used s y s t e m .
improperly
1 0 1 1 : inappropriate request Go to MENU 5 (FPDC)
FPDC already exists ACTION = 1
Hit c to continue to list FPDCs.
FPDC could be not assigned.
1 0 1 2 : incorrect PDC The entered number is valid but is not
does not exist or used a station or data port.
improperly
1 0 1 3 : inappropriate request Port type has to be administered
slot not equipped before proceeding.
1 0 1 4 : inappropriate request Must be a station supported by
must be station System 25. See Voice Terminal Type
Codes in Administration Manual. Can
only move port associated with
station.
1 0 1 5 : inappropriate request Can not move the port associated
can’t move CAP port with the CAP.
1016: incorrect action number Item numbers must be 0-2 at this
must be 0-2 p o i n t .
F-2