AT&T System 25 - Manual (Page 356)

APPENDIX E: Administration Codes and Data
Table E-V. System Administration (Menu=4) (Contd)
ACTION DESCRIPTION DATA
37 Specify type of dialing plan for Home [0=7-digit dialing;
Area Code calls 1 = 10-digit dialing]
38 Specify the number of digits used for [0=13digits,1=15
international dialing digits]
40 Provide call coverage ringing on internal [1=Y/0=N]
c a l l s
41 Specify the number of rings before calls [0-31 ; 2]
are sent to call coverage or call following
calls return to their home station
50 Set time of day [HHMM]
51 Set the date [MMDDYY]
52 Allow SMDR records to be sent to the [1=Y/0=N]
S M D R p o r t
53 Minimum length of calls that will be 10-255; 40]
recorded by SMDR (seconds)
60 Specify the modem request code [1 -9999; 820]
61 Does the receiver respond to remote loop [1=Y/0=N]
62 Disconnect on loss of carrier [1=Y/0=N]
63 Are pins CF and CB common [1=Y/0=N]
64 Disconnect on received space [1=Y/0=N]
65 Should the system send a space [1=Y/0=N]
character on disconnect
68 Enable dial tone for incoming tie trunks? [1=Y/0=N]
69 Allow trunk-to-trunk transfer for incoming [1=Y/0=N]
Loop Start trunks?
70 Should maintenance busy of GS trunks [1=Y/0=N]
be blocked?
71 Assign the CO trunk pool access code [1 -9999]
72 Set the number of DID digits used to [2-4; O for none; 3]
match against station PDCs
73 Assign the number of account code digits [0-15; 15]
74 Display/change expert mode prompt (up [“Command:”]
to 9 printable characters
November 1995 E-37