AT&T System 25 - Manual (Page 387)

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION POSSIBLE SOLUTION
1094: inappropriate request Display attendant position
only DISPLAY of SLC- DTAC/SLAC. See:
CAP status allowed MENU = 1 (Port)
ACTION = 60
for more information.
1 0 9 5 : action number Check MENU 4 (System
out of sequence Administration) for administering
must enter 90 &/or 91 correct sequence.
first
1 0 9 6 : entry out of range Call type priority must be between
data must be 1-7 1-7. Check MENU 4 Action item 92.
1097: entry out of range Call type code must be between 1-
data must be 1-8 8. Check MENU 4 Action item 91
1098: entry out of range Denotes att. that should receive
data must be 0-2 calls from this trunk.
NOTE: Data range must be between
0-2 not 1-3. See:
MENU = 1 (Port)
UNDER TRUNKS
ACTION = 12
for more information.
1099: incorrect entry Must be <= 11 printable ASCII
too many characters characters.
2 0 0 0 : incorrect action number 4-digit number not supported.
can’t exceed 3 digits
2 0 0 1 : inappropriate request Must be data port for Action 22 to
must be data port be legal. See:
MENU = 1 (Port)
UNDER DATA PORT
ACTION = 22
for more information.
2002: inappropriate request Trying to administer a feature that is
must be station or data not related to a station or data port.
p o r t Button number invalid (button
numbers <9 are already
programmed or system access.)
F-9