AT&T System 25 - Manual (Page 355)

APPENDIX E: Administration Codes and Data
Table E-V. System Administration (Menu=4)
ACTION DESCRIPTlON DATA
3 Assign the number of rings before [Number of rings; 5]
unanswered calls extended by Attendant
return to the console (1 -31)
4 Force DID calls to unassigned DID [1=Y/0=N]
numbers to ring at Attendant Console
5 Force calls to FPDCs that are not logged [1=Y/0=N]
in anywhere to ring at the Attendant
C o n s o l e
6 Assign the number of seconds before a [Number of seconds;
camped-on call returns to the Attendant 3 0 ]
console (1-1 20)
8 Number of seconds before park return [0-240; 120]
11-18 Assign the eight PDCs that are used to [Pseudo-PDCs;
access calls parked by the Attendant. 8 0 0 - 8 0 7 ]
Data will be a pseudo-PD. or O for none.
25 Assign a speed dialing access code [1 00-1 89]
26 Assign speed dialing number [0-9, *, #]
25 Assign a virtual facility access code [1 90-1 99]
26 Assign a virtual facility number [0-9, *, #]
27 Allow dial access to this virtual facility [ 1 = Y / 0 = N ]
30 Enter your area code [Your area code]
31 Allow toll-restricted station to make toll [1=Y/0=N]
calls within your area code
32 Is the 1 prefix required to dial outside [1=Y/0=N]
your area code?
33 Is the 1 prefix required to dial toll calls [1=Y/0=N]
within your area code?
34 Toll restrict calls made over inter-PBX [1-9; 0 for none]
trunks (type 805) that start with one
specific digit
35 Specify the number of digits in the IXC [0= 5 digits, 1 = 5 or 7
c o d e digits, 2 = 7 digits]
36 identify the INPA status for toll restriction [0= non-lNPA,
c h e c k i n g 1 = INPA]
E-36 November 1995