Konica Minolta PageScope Net Care Device Manager - Manual (Page 71)

Device List 3
Device Manager 3-41
6
Select the check box beside the devices to which the template data is
to be applied, and then click the [Apply] button.
– To select all devices, click the [Select All] button.
– If the template contains setting items that require the devices to be
restarted, a confirmation dialog box asking the user whether to
restart the devices appears.
– To clear the entered information, click the [Clear] button.
If you select [Apply now.] in [Setting Method], the device data setting
result appears.
If you select [Schedule an application (by Device) Setting] in [Setting
Method], the Multi-Setting page appears.
2
Note
If "SNMP Write Settings" and "OpenAPI Setting"are not correctly
specified on the Device Information Settings page, the "Set to Devices"
button is disabled.
If there are too many devices, it may take time to configure device data
settings.
2
Reminder
Depending on models, you cannot copy some setting values between
models.
2
Reminder
For details on the result page, refer to "Checking the result of the
operation to specify the device data" on page 3-42.