Konica Minolta PageScope Net Care Device Manager - Manual (Page 261)

Server Settings 6
Device Manager 6-3
Use SMTP Authentication Select this check box to use SMTP authentication when
sending E-mail messages.
2
Reminder
To enable communication with an SMTP server
via SSL, [Local Computer] must be selected as
a store in which the certificate is placed.
Saving a server certificate on a personal basis
does not allow communication with an SMTP
server via SSL.
Account of SMTP Server Specify the account of the E-mail address specified in E-
mail Address (FROM).
Password of SMTP
Server Specify the password of the E-mail address specified in E-
mail Address (FROM).
Use POP before SMTP Select this check box to use POP before SMTP authentica-
tion when sending E-mail messages.
2
Reminder
POP before SMTP authentication is a method
to perform receiving operation before sending
an E-mail and obtain authentication from a re-
ceiving server to permit sending.
POP Server Address Specify the address of the POP3 server to be used for POP
before SMTP authentication.
POP Server Account Specify the account of the POP3 server to be used for POP
before SMTP authentication.
POP Server Password Specify the password of the POP3 server to be used for
POP before SMTP authentication.
POP Server Port Specify the port number to be used for POP before SMTP
authentication.
Send e-mail. Sends a test E-mail to an administrator to have him or her
check the E-mail server settings.
2
Reminder
A test E-mail is sent to [E-mail Address] speci-
fied in Administrator Settings. E-mail transmis-
sion will fail if setting items are incorrect.
[Apply] button Click this button to apply the setting changes specified on
this page.
[Clear] button Click this button to cancel the setting changes specified on
this page.
Function Description