Restarting the device, Releasing a device problem – Konica Minolta PageScope Net Care Device Manager User Manual
Page 42
Device List
3
Device Manager
3-12
Restarting the device
The network interface card and device can be restarted remotely from the
Device Management page.
1
Click the [Reset] tab.
2
Click the [Execute] button.
–
If you click the [Execute] button for "Reset NIC", the device's
network interface card will be restarted.
–
If you click the [Execute] button for "Reboot device", the device will
be restarted.
Releasing a device problem
If a problem occurs on the device, it can be released by remote control from
the device management page.
1
Click the [Troubleshooting] tab.
2
Click the [Execute] button.
2
Note
Some types of problems cannot be released by remote control. If you
have failed to release a problem, contact our service representative.
This manual is related to the following products: