Konica Minolta PageScope Net Care Device Manager - Manual (Page 159)

Device List 3
Device Manager 3-129
2
Reminder
If the server fails to connect to the device, check the following settings.
- OpenAPI Settings:
Specify the parameter that is the same as that specified for the item
accessible by pressing the [Utility/Counter] button on the device, and
then selecting "Administrator Settings" - "System Synchronize" -
"OpenAPI Setting" - "Authentication". Alternatively, check that the device
is powered on.
- SNMP Read Settings
Specify the parameter that is the same as that specified for the item
accessible by pressing the [Utility/Counter] button on the device, and
then selecting "Administrator Settings" - "Network Settings" - "SNMP
Settings". Alternatively, check that the device is powered on.
- SNMP Write Settings:
Specify the parameter that is the same as that specified for the item
accessible by pressing the [Utility/Counter] button on the device, and
then selecting "Administrator Settings" - "Network Settings" - "SNMP
Settings". Alternatively, check that the device is powered on.
- Authentication Settings:
Specify the parameter that is the same as that specified for the item
accessible by pressing the [Utility/Counter] button on the device, and
then selecting "Administrator Settings" - "Network Settings" - "WebDAV
Settings" - "WebDAV Server Settings" - "Password Setting".
Alternatively, press the [Utility/Counter] button on the device, and then
select "Administrator Settings" - "Network Settings" - "http Server
Setting" to check that "Enable" is specified. Alternatively, check that the
device is powered on.
- Admin. Authority:
Specify the parameter that is the same as the administrator password for
the device.
2
Reminder
The information displayed varies depending on the device.