Konica Minolta PageScope Net Care Device Manager - Manual (Page 115)

Device List 3
Device Manager 3-85
Adding SNMPv3 settings
Specify the settings to be used with the SNMPv3 protocol during an SNMP
broadcast discovery/SNMP unicast discovery/SNMP multicast discovery.
1
Click the [Add] button for "SNMPv3".
2
Specify the necessary settings, and then click the [Apply] button.
– To clear the entered information, click the [Clear] button.
2
Note
The security level is "NoAuth/NoPriv" that cannot be changed.
3.10.4 Deleting settings
Follow the procedure described below to delete settings from the following
sections.
-
SNMP Broadcast Discovery
- SNMP Unicast Discovery
- SNMP Multicast Discovery
- SNMPv1 Settings
- SNMPv3 Settings
1
Clear the check box for the settings to be deleted, and then click the
[Delete] button.
2
Check the message that appears, and then click the [OK] button to
delete the template.
The selected settings are deleted.
Function Details
User Name Type in the user name.
Context Name Type in the context name.
Port Number Type in the port number. The default is "161".