Konica Minolta PageScope Net Care Device Manager - Manual (Page 69)

Device List 3
Device Manager 3-39
3.5.5 Copying the template information to the devices
The registered template information is specified for multiple devices
collectively.
2
Note
Any template information that is not from the device cannot be registered
to the devices.
2
Reminder
To execute multi-setting processing at periodic intervals, you need to
configure schedule settings. For details, refer to "Schedule Settings" on
page 3-47.
1
On the Multi-Setting page, select the template, and then click the [Set
to Devices] button.
The Set Device Data page appears.
2
In [Setting Method], select a timing to configure the multi-setting.
– To immediately configure the multi-setting, select [Apply now.].
– To configure the multi-setting at the specified time, select
[Schedule an application (by Device) Setting]. Select a time to
configure the multi-setting from the [Time] drop-down list.
– Click the [Clear "Schedule an application (by Device)"] button on
the Multi-Setting page to clear the schedule specified in [Schedule
an application (by Device) Setting].
3
In [Send Results], select whether to receive a multi-setting result
notification E-mail.
– When not receiving a result notification E-mail, select [Do Not
Notify] in [Notification Setting].
– When receiving a result notification E-mail, select when to receive
a notification. In [Notification Setting], select [Always send the
results] or [Send results only when failed.].
– In [E-mail Address], enter the E-mail address to receive a result
notification E-mail.
– Select the language to display the result notification E-mail from the
[Language] drop-down list.